The ECP Series is available in 4 zones with Conventional Fire Detection and Warning Panels manufactured by the new generation microprocessor technology and can be expanded to 16 zones with 4 zone upgrade cards. Each zona3 detector and unlimited number of buttons can be connected (in accordance with EN54-2 and EN54 Standard). Affordable, stylish new design, modular construction and user-friendly ease of use are preferred in many medium and large sized businesses On the panel, there are 8 controllable keys, one for each, 1 for each, including SIREN ACTIVE / STOP, BUZZER DIRECTION, RESET, LAMP TEST, AUXILIARY CONTACT DISABLED, SIRENS DISCONNECTED, CONTROL, DELAYED ACTIVE. There are also LEDs on FIRE, ERROR, DISABLED, SYSTEM ON, TEST, SYSTEM ERROR, POWER FAILURE, BATTERY FAULT, 24V DC (AUX) FAULT, EARTHING FAULT on the panel. Both alarm (Red) and fault-disable-test (Yellow) Leds are available separately for each zone. There are security keys and 3 different user levels against unauthorized persons. Each zone can be temporarily deactivated, if necessary, and deactivated at the same time. The panel has 2 siren outputs with short circuit protection, relay output for fire and fault, 24V DC Aux Backup Supply output. Siren and relay outputs can be delayed separately. (Settings can be programmed as 15-30-45-60 sec). The panel works with 24V and each panel is connected to 2 batteries of 12V watertight type. The ability to monitor all incidents without intervention is a key feature of reporting incidents until the last reset.